Skip to content Skip to sidebar Skip to footer

How to Setup Router Via HP 2022

How to Set Route Via HP

How to set router via cellphone This is to install Wifi at home because it is simpler, because the high number of cellphone users makes the presence of Wifi increasingly needed in various places.

But in general, setting up a Wifi router using PC media assistance by professionals, but router settings can also be done via cellphone.

More details you see how to set up router via cellphone which is as follows:

Router Login Username and Password

Now for how to set up the router via your cellphone, you can also use a laptop that is connected to the router network.

You only need to login to the web UI at 192.168.0.1 but to login the username and password you can see on the back of the device or enter the username as follows:

Router Login

Username : admin

Password : admin

IP Address : 192.168.0.1

Note: the ip address is not always 192.168.0.1, because of that some routers even have different defaults, to make sure you can first connect and check the ip address section of the Hp WiFi settings.

1. How to Setup Router Via Hp

How to Set Route Via HP
How to Setup Router Via Hp

The first setting you can use is to use router mode.

Now with you using the mode allows you to have a different LAN network segment and the main network with a new LAN network ip address.

Below is how to set up a router via a cellphone, which is as follows.

  1. The first step you have to do is please turn on the router and plug in the internet cable through the WAN port
  2. After that connect to the Router network and enter the address http://192.168.0.1/
  3. Now there you will be asked to login first, then please fill in the username and password as recorded on the back of the router.
  4. Then you go to the Quick Setup section and you just select the Wireless Router mode and click next.
  5. Then for the connection type, please select Dynamic IP if the main network has DHCP IP enabled or Static IP if the IP is set manually.
  6. After that you click Next and select No, I do NOT need clone MAC Address.
  7. Then you name the new network that will be created and don’t forget to give a password.
  8. Finally, you just click Save and the router will restart.

2. How to Set the Router as an Access Point

How to Set Route Via HP
How to Set a Router As an Access Point

And the use of Access point mode allows you to deploy a new network that comes from a modem or wireless router from an ISP using a LAN cable connection.

Now for how to set the router as an access point that is not much different from setting the router via cellphone, it is as follows:

  1. The first step is to turn on the Router device
  2. After that, connect your laptop or Smartphone to the WiFi Router network
  3. Next, open your browser and go to the address http://192.168.0.1/ and login with the username and password listed on the back of the device.
  4. Then you just click next and go to the Quick Setup page
  5. Then in the mode option select Access Point
  6. After that, in the Wireless section, create the desired SSID/WiFi name and Password and click Next.
  7. Then in the Networking Settings LAN Type section, just select Static IP or Dynamic IP depending on the main Router settings.
  8. And finally click Finish to save the settings.
  9. Done, the device will restart.

3. How to Set Range Extender

How to Set Route Via HP
How to Set Range Extender

When the signal emitted by the main router at home is weak and cannot reach certain corners in certain areas, you can use this Range Extender Mode to expand the existing network without making further settings.

With Range Extender mode, you can very easily expand the network from the main router.

Below are the steps for setting up a router via a cellphone, which are as follows:

  1. The first step you have to do in Quick Setup is to select the Range Extender mode and click Next.
  2. Then the device will start scanning for nearby networks, after that please select the network you want to expand by clicking connect and enter the password.
  3. After that you can choose to create the same network name or create a new name.
  4. If it is then you click Next
  5. Now for Network Settings you can select Smart IP and click Next.
  6. Then you make sure the settings that have been made are appropriate and click Next again to save.
  7. After that the device will restart and you can connect to a new network with Range Extender mode.

4. How to Set WISP Mode Router

How to Set Route Via HP
How to Set WISP Mode Router

This Mide WISP is almost similar to a Range Extender where the router will look for the main router’s wifi signal.

What makes it different is that in Wisp mode you will create a new network like Access Point mode but using a WiFi connection.

Now for How to Setting Router via Hp Mode WISP is as follows. this:

  1. The first step you have to do in Quick Setup is select WISP Mode and click next.
  2. Then select Dynamic IP if you want to get an IP address automatically.
  3. Then continue on the next page you can choose an available Wireless or WiFi network to connect to.
  4. After that, enter the WISP network password and the new WiFi network name.
  5. Then on the next page you can see the status of the AP used.
  6. If it is appropriate then you just click finish and the router will reset to save the settings.

5. How to Set Router Using Applications

How to Set Route Via HP
How to Set Router Using Applications

Basically, how to set up a WiFi router via cellphone is not much different from setting up wifi using a laptop.

But you need to first connect to the WiFi network via the cellphone you want to use for configuration.

Then you open the browser and go to the address http://192.168.0.1/ and log in with the username and password listed on the back of the device.

If you want to set it via a browser, you can also do it via an application called TP-Link Tether for routers with the TP-Link brand.

TP-Link Tether itself is an official application that has been issued by TP-Link to set up a WiFi Router via cellphone.

Below is how to set up the router via Hp-Link, which is as follows:

  1. The first step you have to do is download and install the TP-Link Tether application first (Download the TP-Link Tether App)
  2. If so, please connect your cellphone’s WiFi network to the router.
  3. Next you open the Tether application and wait, and the application will scan whether you are on the TP-Link router network or not.
  4. If so, please click on the router you are using.
  5. Then the last you just do the settings according to the example above.
  6. Done.

The final word

Well that’s some how to set router via cellphone which you can follow.

If you want to use the latest version then you can download it via the link we have provided above.

Hopefully the method above can be useful for you to use and don’t forget to share it with your friends or relatives.

That’s all of our discussion in this article about how to set up a router using an Android 2022 cellphone. Hopefully it’s useful and good luck.