Skip to content Skip to sidebar Skip to footer

How to Make an Indoor TV Antenna Signal Booster 2022

How to Make an Indoor TV Antenna Signal Booster

How to make an Indoor TV antenna signal booster This is by knowing the cause of the non-optimal signal, so it can make it easier for you to fix so that the signal is strong.

TV antenna is a device that is able to capture signals from broadcast towers and convert them into digital images on TV.

This tool is often used if the TV picture looks blurry because it can’t pick up the signal from the broadcast tower.

However, there are times when the TV picture still looks damaged or less than optimal even though the antenna has been installed.

Sometimes we feel irritated and disturbed by a bad TV signal when watching on TV, especially if what is being watched is a favorite program.

Because with the picture that appears or appears like ants at war and the sound of the TV sometimes hiss and hoarse, even though the antenna used is an Indoor TV antenna.

There are many reasons why the signal received by the TV antenna is not optimal, so the signal comes and goes and the display or image on the TV is not clear, so it can create emotions.

Therefore you have to pay attention to how to install an Indoor TV antenna in order to get a clear TV picture.

Indoor TV antennas or indoor antennas are often used for those who don’t want to bother Siri to install an antenna using a pole.

In addition, by using an Indoor TV antenna you don’t have to worry about being hit by lightning when it rains, because the antenna position is safe in the house.

And it is also important for you to know about how to strengthen the signal of this Indoor TV antenna.

Because to improve the picture and audio quality of the TV, the signal captured by the antenna must be optimal.

But now you don’t have to worry about your Indoor TV antenna signal if it’s not optimal.

Because in this article we will tell you about how to make an Indoor TV antenna signal booster.

1. How to Make an Indoor TV Antenna Signal Booster by Checking the TV Tuner

How to Make an Indoor TV Antenna Signal Booster
How to Make an Indoor TV Antenna Signal Booster by Checking the TV Tuner

The first for how to make an Indoor TV antenna signal booster is to check out the TV Tuner.

Because one of the causes of a TV signal that cannot be picked up properly by the antenna is the poor quality of the tuner.

This tuner is usually already installed on the TV from the factory directly, because the main function of this tuner is to capture TV broadcast signals.

And this tuner is on the back of the TV, so before you buy a TV, please check the tuner carefully.

You have to find out that the quality of the Tuner is good or not, because the Tuner will determine the quality of the picture that is displayed by the TV.

2. How to Make an Indoor TV Antenna Signal Booster Using a Booster

How to Make an Indoor TV Antenna Signal Booster
How to Make an Indoor TV Antenna Signal Booster Using a Booster

The second way to amplify the Indoor TV antenna signal is to use a Booster tool.

Because this is the easiest way to amplify a TV signal, you can buy this tool in offline stores or in the marketplace.

And the price of this Booster is not too expensive or quite affordable, namely the price starts from Rp. 20,000 only, for the use of the Booster it is quite multifunctional because it can be used for two TV units at once.

Below are the steps for how to make an Indoor TV antenna signal booster by installing an Indoor device, which are as follows:

  • The first step, please attach the antenna cable to the hole on the back of the Booster.
  • Then please install the TV cable on the front of the Booster (usually consists of two holes).
  • The next step, please plug the tool into the socket and adjust the amount of reinforcement using a min screwdriver on top of the Booster.
  • Then the Booster is ready to use.
  • Done.

3. How to Make an Indoor TV Antenna Signal Booster by Installing the Antenna Correctly

How to Make an Indoor TV Antenna Signal Booster
How to Make an Indoor TV Antenna Signal Booster by Installing the Antenna Correctly

The last way to amplify the Indoor TV antenna signal is to install the antenna correctly.

Because the location of the antenna is a factor that determines the strength of the signal received by the TV, therefore you must ensure that the antenna is installed correctly.

Please listen to the steps below for how to make an Indoor TV antenna signal booster by installing the antenna correctly, which is as follows:

  • Indoor antennas should be used only for those of you who are in a city area and close to a TV transmitter.
  • And for locations that are far from the TV transmitter, it is better to use an Outdoor antenna.
  • Please prepare all the tools and materials such as cables, pliers, scissors, and screwdrivers.
  • Then please peel the skin of the cable along 1.5 cm using a razor.
  • If the cable fibers appear, then you make them together with other components such as aluminum foil and the inner cable.
  • After that, please loosen the bolt on the jack port and connect it to the TV antenna port.
  • The next step please enter the cable and insulator.
  • Please wrap the stringy cable and glue it using a soldering iron.
  • You have to make sure not to put the stringy wires and the copper wires together.
  • Next, please tidy up the cable and attach the antenna.
  • For Indoor antenna, please put it above the TV.
  • You’ll also need to attach a cable to connect the TV to the antenna, which is usually on the back of the TV.
  • Done.

The final word

Those are 3 ways you can do to how to make an Indoor TV antenna signal booster what you need to know so that your Indoor TV signal is strong.

If the position and installation of the antenna is correct, but the picture is still bad or less than optimal, then you can consider Booster.

Once again, we remind you that when you buy a TV, you must first make sure that the quality of the tuner is good or not because this will greatly affect the reception of the signal on the TV.

Hopefully the contents of this article are useful for all readers and can make it easier for all of you to be able to get the optimal antenna signal on your TV.