Skip to content Skip to sidebar Skip to footer

Code of Energy Saving Token 2022

Token Electricity Saving Code

Token electricity saving code which is currently being sought after due to the increasing price of fuel.

Almost all people who use postpaid PLN electricity have switched to using electricity with a prepaid system.

Because the use of prepaid electricity or electricity pulses or tokens is considered much more efficient than postpaid electricity.

Users only need to buy a credit voucher with the desired nominal and can directly input it via the electricity meter.

That way, customers can adjust electricity consumption according to their respective needs and abilities.

However, now there are some assumptions that pulse electricity is much more wasteful than postpaid.

Indeed, regulating the use of electricity is of course the duty of the customer.

Instead of using illegal methods, there are actually ways to set up a pulse or toke electricity meter so that you save more on expenses.

You can also use a way to limit the use of electricity and credit, by using certain codes according to the brand of your electricity meter.

In addition, all electricity meters used for prepaid systems also have many advantages.

Don’t get me wrong, the prepaid electricity meter is not just a machine with numbers attached.

Because there are many secret codes that you can find by entering special codes on the meter.

One of them you can turn off the electric alarm that sounds when your electricity token is running out.

For more details, please refer to the token electricity saving code below until it’s finished, gess!

1. Token Electricity Saving Code with Conlog Brand

Token Electricity Saving Code
Token Electricity Saving Code with Conlog Brand

Below are some token electricity-saving codes that you can use on meters with the Canlog brand, which are as follows:

Figure1 For information on average power usage.

If you want to know the information on the number of kWh (kilowatt-hours) of electricity that has been used, you can click number 2.

And lift number 6 is usually used to find information on the number of kWh (kilowatt-hours) of electricity that has been added.

The number 11 is to see the last pulse value.

2. Hexing Brand Token Electricity Saving Code

Token Electricity Saving Code
Hexing Brand Token Electricity Saving Code

You can use the token electricity saving code that already exists below for those of you who use a Hexing brand meter, which is as follows:

  • 800 To restart the meter.
  • 851 For information on the total kWh of electricity that has been used .
  • 807 For information Mains voltage.
  • 808 For information on Ampere used.
  • 814 For information on the electrical power used.
  • 852 For information on the last pulse code or token.
  • Number 817 for information on the number of kWh of electricity at the last charge.
  • You can type in the number 809 to count the number of times the power goes out.
  • 804 To check the ID meter of prepaid customers.
  • 812 To turn off the electricity kWh limit reminder alarm.
  • 801 To check the remaining electricity kWh information.
  • 815 For information on the date of the last top up or token.

3. Token Electricity Saving Code with Itron Brand

Token Electricity Saving Code
Token Electricity Saving Code with Itron Brand

Use some of the token electricity-saving codes that we have provided below for those of you who use the Itron brand, which are as follows:

  • 00 To restart the meter.
  • Figure 03 for information on the total kWh of electricity used.
  • 07 For information on the limit of electric kWh.
  • 09 For information on the electric power used.
  • 41 For information Mains voltage.
  • 44 For information on Ampere used.
  • 47 For information on the electrical power used.
  • 54 For the latest credit/token code information.
  • For those of you who want to know the information on the number of kWh of electricity at the last charge, you can type the number 59.
  • Type in the number 69 to count the number of times the power goes out.
  • 75 To check the ID meter of prepaid customers.
  • 79 To check the minimum limit of the alarm.
  • 456xx To change the minimum limit of the alarm.
  • If you want to check the delay of the alarm in minutes you can type in the number 78.
  • 123xx To change the delay of the alarm, for example use the code 12310 for 10 minutes.
  • 90 To turn off the LED light on the meter.

4. Token Electricity Efficient Code for Glomet Merek Brand

Token Electricity Saving Code
Token Electricity Saving Code for Glomet Merek Brand

You can directly use the token electricity saving code that we have provided for you below for the Glomet brand, which is as follows:

  • 37 To check the remaining kWh of electricity.
  • 38 For information on the total kWh of electricity that has been used.
  • 41 For information Mains voltage.
  • 47 For information on costs used.
  • 54 Code for the last top-up/token.
  • And number 59 to find out information on the number of kWh at the last charge.
  • 75 To check the ID meter of prepaid customers.
  • 79 To check the minimum limit of the alarm.

5. Token Electricity Saving Code with Star Brand

Token Electricity Saving Code
Token Electricity Saving Code with Star Brand

Please take a look at some of the token electricity saving codes that we have provided below for those of you who use the Star brand, which are as follows:

  • 07 To check the remaining electric kWh.
  • 12 To check the minimum limit of the alarm.
  • 65 To check the ID meter of a prepaid customer.
  • Number 76 for information on the number of kWh at the last charge.

Those are some codes that we can provide for you so that you can save even more in using electricity.

Use the codes that we have provided above according to the meter you use at your home or boarding house.

If you do not want to use the codes above, you can limit the use of electricity you use.

The final word

There he is token electricity saving code which you can adjust to the brand of meter that you use at home.

Only by following the codes above and adjusting electricity consumption to be even more efficient, so you can estimate how much electricity is spent more precisely.

It’s very easy, not the way, you can just try it now so that spending on buying electricity tokens can be more efficient.

Hopefully the review that we have given to you above can add to your insight about the prepaid meter you are using.

If you think the explanation we have given above is important, don’t forget to share it with your friends or relatives who don’t know it yet.

That’s all the discussion that we can provide for you in this article, hopefully it will be useful for you and good luck, guys!!!